Although the wear-resistant elbow has a wide range of applications and has a positive impact on people's lives, there are still many parts that need attention in the process of use.Wear-resistant elbows are widely used, and the precautions for using wear-resistant elbows with different materials are also different. One thing that can't be ignored in the construction of 

wear-resistant elbows is soil quality, and of course there are comprehensive factors of geology and various aspects. For ceramic coatings, more attention should be paid to the temperature that the equipment or parts can withstand. If it is used at high temperature, such as the tertiary air valve we know, then the valve body should be fitted with refractory castable, and the required thickness should be determined according to the material used in the motherboard and the maximum allowable heat consumption of this material, and then the steel mesh should be welded on the surface of the refractory castable, and then the wear-resistant ceramic coating should be applied on it. If the construction thickness is less than 20 mm, it is only necessary to weld the steel mesh on the motherboard of the equipment after removing the bottom layer of oil and paint. Generally, 

we will use the flower mesh welding, usually setting the distance between the welding points to 200 to 300 mm, and then smearing the mixture of stirred wear-resistant ceramic dry powder, steel fiber and water. Ceramic coatings cure quickly at room temperature, so we will start construction as soon as possible after mixing. Generally, the construction time is related to the temperature of the site at that time, usually 30 to 60 minutes.We need to grasp the problems that should be paid attention to in the use of wear-resistant elbows, and make better use of wear-resistant elbows to create value for our lives.